SFA Link
 
 
IGBT & MOSFET LOW SIDE GATE DRIVERS
Low Side Driver Selection Graphic
IX4xxx & IXD_6xx GATE DRIVER FAMILY (top)
  • 1.5A to 30A Peak Source/Sink Drive Current
  • Wide Operating Voltage Range: 4.5V to 35V
  • -40°C to +125°C Extended Operating Temperature Range
  • Logic Input Withstands Negative Swing of up to 5V
  • Matched Rise and Fall Times
  • Low Propagation Delay Times
  • Low 10µA Supply Current
  • Low Output Impedance

Part
Number

Ipeak

(A)

Output Resistance
(Ohms)
Source/Sink
Logic
Configs
Enable
Function
Under
Voltage
Lockout
(VCC<)
Package
IX4426 1.5 8 / 4 D - - 54, 56
IX4427 1.5 8 / 4 E - - 54, 56
IX4428 1.5 8 / 4 F - - 54, 56
IXD_602 2 4 / 3 D,E,F - - 20,53,54,56
IX4423 3 4 / 3 D - - 54
IX4424 3 4 / 3 E - - 54
IX4424G 3 4 / 3 E - - 20
IX4425 3 4 / 3 F - - 54
IX4340 5 1.5 / 1.1 G Yes 3.8V 53
IXD_604 5 2.5 / 2 D,E,F,G Yes - 20,53,54,56
IXD_609 9 1 / 0.8 A,B,C Yes - 20,53,54,56,57,58
IXD_614 14 0.8 / 0.6 A,B,C Yes - 20,53,57,58
IXD_630 30 0.4 / 0.3 A,B,C Yes 12.5V 57,58
IXD_630M 30 0.4 / 0.3 A,B,C Yes 9V 57,58
Packages and Configurations
IX2204: Dual Low Side IGBT Gate Driver (top)
  • High Output Current: 2A Source/4A Sink
  • Wide Operating Voltage Range: -10V to +26V
  • Negative Gate Drive Capability
  • Desaturation Detection Circuit
  • Separate Source and Sink Outputs
  • Programmable Blanking and Output Tristate
  • TTL Compatible Inputs
  • -40°C to +125°C Extended Operating Temperature Range
  • Under-Voltage Lockout Circuitry
  • Fault Status Output

IX2204 (Data Sheet Rev. 3) The IX2204 is a dual high current gate driver specifically designed to drive the gates of high current
IGBTs. The IX2204 provides two high current outputs capable of sourcing 2A and sinking 4A. The outputs can be paralleled for IGBT gates that require higher drive current. The outputs have a wide operating voltage range, and are able to provide a negative gate
drive voltage to ensure the turn-off of high power IGBTs. A desaturation detection circuit protects the power IGBT during a short circuit. The IX2204 has a programmable two-level turn-off feature that protects the device against excessive voltages when the IGBT is being turned off due to an over-current situation.

The IX2204 has under voltage lockout circuitry and a fault status output, and is available in a 16-lead thermally enhanced SOIC package.

IX2204 Functional Block Diagram
Click here for Reliability Reports
 
Sales Partner Login Sales Partner Login Link to IXYS Clare Partner Login - Password Required PARTNER LOGIN: PASSWORD REQUIRED